Soraco Data logger 32 channel High-speed

32 channel high-speed data logger

It is used to measure sensor data and store them. Analog data is stored at a high speed after being digitized, and after testing, it is possible to transfer them to a computer and analyze them with software.

Uses:

• Data recording of temperature, pressure, humidity, etc. during testing
• Dynamic data recording such as vibration, acceleration, impact, force and weight
• Vibration analysis and experimental acquisition of vibration modes
• Determining the stress and strain behavior of the part with the help of strain gauge
• Can be used as a collector to collect data from rotating systems such as turbine blades
• Data collection of TB load types

Device specifications:

• Number of measurement channels: 32 channels – (4 modules with 8 channels)
• The possibility of independent operation of each module and the possibility of networking and synchronizing them
• Sampling rate of 1500 samples per second simultaneously
• Sampling rate 10000 samples/second in peak detection mode
• Type 1 (standard): bit 12 and Sps 1500 – with the ability to connect the vibration sensor and transmitters of temperature, pressure, etc. with an output of 4 to 20 mA or 0 to 10 volts
• Type 2 (fast strain gauge): 12 bits and Sps 1500 – direct connection of strain gauge and load cell from 120 ohms up – possibility of supporting half bridge and quarter with side module
• Type 3 (accurate strain gauge): 24 bits and Sps 50 – strain gauge and load cell
• It has a wireless data transmission system with a speed of 38 kbps
• The possibility of applying an analog amplifier to amplify the sensor signal
• Software to display information numerically and graphically
• Vibration analysis software and FFT analysis
• Preparation of output files for Excel and Me’Scope software
• Data storage with a battery of at least 1 hour

Download Catalog